My raid-10 speed seems slow when test using hdparm

See http://tldp.org/HOWTO/Software-RAID-HOWTO-9.html

To check out speed and performance of your RAID systems, do NOT use hdparm. It won't do real benchmarking of the arrays.

Instead of hdparm, take a look at the tools described here: IOzone and Bonnie++.

Was this answer helpful?

 Print this Article

Also Read

How to install Windows VPS under Hypervm

After you follow this http://wiki.lxcenter.org/HyperVM-Windows and still problems below:1....

Why my drive is slow

First, check to make sure write cache is enabled. On Centos, you type hdparm -I /dev/sda Then...

How do I assign additional IP addresses in RedHat/CentOS?

If you are using CPanel, you should add the IP addresses through WHM.  Do not follow...

Hints on Creating Windows KVM Templates

Templating Windows is a fairly easy process for KVM. All versions of windows can be resized by...

How can upgrade kernel on xen main node or container too?

Centos:on host node---yum updatecd /usr/local/lxlabs/hypervm/httpdocs/lphp.exe...